|
||||
 |
||||
 |
||||
| EINDOS-210 FEATURES | ||||
 |
||||
| Size: | 96x90x20mm | |||
| BUS | PC/104 | |||
| I/O Type | Analog Input | |||
| Resolution: | 12 Bit or 14Bit | |||
| Channel: | 2 | |||
| Conversion Rate: | 10MSPS/ch, Differential | |||
| Sampling Method: | Synchronous | |||
| Acquisition Mode: | One Shot | |||
| Input Bandwidth: | 5M Nominal | |||
|
|
 |
Memory Size: | 32K/Channel | |
| The EINDOS-210 features two 12 bit or 14 bit, high speed, synchronnous, differential analog input channels on a standard PC/104 module, Analog inputs are connected through 40pin header and 34-pin header (Digital I/O). Input bandwidth is 5MHz nominal at 50% range. | Trigger Source: | External TTL,software | ||
| Input Range: | +/-5V, 2V,1V,0.5V | |||
| Input Coupling: | DC | |||
|
The board is designed to be triggered by TTL input or software. After triggering the date is stored into on-board memory, the date is then transferred from the module to system memory via memory to memory transfers |
Timebase: | software selectable at | ||
| 10MHz,5MHz...625KHz | ||||
| Analog output: | 4 (single ended) | |||
| The module comes with up to 32K samples of memory per channel, Other settings include 1K and 8K. | Output: | 0 to 5V, 12 Bit | ||
| Digital I/O (TTL): | 16 inputs/ 16 Outputs | |||
| EINDOS-210 included 16 TTL digital inputs and 16 TTL digital outputs. You can also have option with 4 analog outputs (single ended,12 bit, 0 to 5V or 0 to 10V, with 100KHz.). | Power Supply: | +5VDC, @1.0A | ||
| Operating Temp. | -40C to +85C | |||
| Operating Humidity: | 5% to 95% | |||
|
The board was designed with latest in high frequency layout techniques to improve noise immunity and was designed to run off 5V only supplies to minimize power supply compatibility issues. |
Connectors: | SMA | ||
| driver: | Windows 98/NT/2000 | |||
| Linux | ||||
| EINDOS-210 can work in harsh environment, the Operating Temp. from -40C to +85C. | debug GUI Software | |||