|
 |
 |
| กก |
|
กก |
EINDOS-2100
FEATURES |
|
 |
|
|
|
Size:
|
96x90x20mm
|
|
BUS
|
PC/104plus
|
|
I/O Type
|
Analog Input
|
|
Resolution:
|
12 Bit (1/4096)
|
|
Channel:
|
2
|
|
Conversion Rate:
|
65,100,200MS
|
|
Sampling Method:
|
Synchronous
|
|
Acquisition Mode:
|
One Shot
|
|
Input Bandwidth:
|
50M Minimum
|
|
|
 |
|
Memory Size:
|
Up to 8M
|
|
The
EINDOS-2100
features two 12 bit,
high speed, synchronnous, singled ended analog input
channels
on a standard PC/104-Plus module, Analog inputs are connected through
SMA connectors and terminated into 50 ohms. Input bandwidth is limited
to 50MHz by default for the user's convenience, although input bandwidth
can set as high as 100MHz. |
|
Trigger Source:
|
External TTL, Software
|
| |
|
Segment Number:
|
1024 Segments or 1M
|
|
|
Input Ranges:
|
+/- 0.525,+/-0.25,+/-2V
|
|
The board is designed to be triggered by TTL input or software.
Each segment is packed into memory until the memory is full. Timing is
managed by a on-board controller referenced to a crystal oscillator. the
clock frequencies available are divided down in powers of 2.External
clock allows user to use a more stable clock or sych. 2 or more. |
|
Input Coupling:
|
DC
|
|
|
Input Offset:
|
+/- 5.0V Maximum
|
|
|
Timebase: |
software
selectable at |
|
A
universal DLL is available for Windows 98/NT/2000/XP and Linux, A simple
debug Graphical User Interface (GUI) software for windows is included
with the drivers for quick driver install verification and simple
testing. |
|
|
100MHz,50MHz...1MHz
|
|
|
Power Supply:
|
+5VDC, @1.0A
|
|
|
Operating Temp.
|
-40C to +85C
|
|
|
Operating Humidity:
|
5% to 95%
|
|
The board was designed
with latest in high frequency layout techniques to improve noise
immunity and was designed to run off 5V only supplies to minimize power
supply compatibility issues. |
|
Connectors:
|
SMA
|
|
|
driver:
|
Windows 98/NT/2000
|
|
|
กก
|
Linux
|
|
EINDOS-2100 can work in harsh environment,
the Operating Temp. from -40C to +85C. |
|
|
debug GUI Software
|
|
กก
|