|
 |
 |
| ¡¡ |
|
¡¡ |
CPU
FEATURES |
|
 |
|
. |
|
Size:
|
114x95mm
|
|
CPU:
|
AMD Geode LX800
|
|
BUS Internal:
|
PCI/AGP/ISA
|
|
Bus External:
|
ETX
|
|
Performance:
|
500MHz
|
|
DRAM (MB):
|
DDR RAM: up to 1024M
|
|
Cache:
|
Built-In CPU
|
|
Ethernet:
|
10/100 Base-T
|
|
IDE:
|
UDMA33/66/100
|
|
|
 |
|
Mouse/Keyboard:
|
|
|
The
EINDOS-EB800
is a highly complex ETX board with the functionalities of a embeded
motherboard.
It is equipped with a AMD LX800,500MHz CPU, 256Mbytes up to 1024MBytes
DDR-RAM, PCI and ISA bus,and additional
peripheral devices,such as 2 serial interfaces,one printer interface,
floppy, LAN, audio input and output, four USB
interfaces,keyboard/mouse,
CompactFlash, CRT, TFT
(Build in AMD CS5536 Video Controller with up to 254MB VRAM) and two IDE connections. |
|
Floppy:
|
(Share
with LPT)
|
|
|
USB:
|
4 (2.0)
|
|
|
Parallel:
|
Uni/ECP/EPP
|
|
|
Video Memory:
|
Up to 254MB
|
|
|
Analog CRT:
|
|
|
|
Video
Controller: |
Build-In CS5536 |
|
The
power supply of the hardware module is effected over the ETX header
strip. Only 5 volt ¡À 5% of voltage are necessary for the operation of
this hardware module. In order to use the ATX functionalities, an
additional suspend voltage of 5 volt ¡À 5% must be attached.
The 3,3 volt lying close to the ETX connector X1 are generated on the
board and can be loaded with maximum 500 mA. Do not in any case connect
the 3,3 volt of the ETX connector with an external 3,3 volt power supply
unit.
|
|
LCD:
|
18/24 Bit LVDS
|
|
|
Serial Port:
|
COM1/COM2
|
|
|
TV Format:
|
NTSC,PAL,HDTV
|
|
|
Sound:
|
AC97
|
|
|
Speaker:
|
|
|
|
CompactFlash:
|
Type II (IDE2 Master)
|
|
The
integrated graphic controller support CRT(1,920x1440) and flat panel
interface(1600x1200) TTL by 24 bit color.
Also incorporates the standard ports:IDE,Floppy,LPT,two Serial port,
PS/2 Keyboard, Mouse,4x USB2.0,100/10 Based LAN and AC97 Sound
interface.A
compact flash holder type II is provided on the EINDOS-EB800 board. they
can therefore be responded like normal hard disks.
The compact flash card is run as master device in the second IDE
controller.
|
|
Power Management:
|
APM, ACPI
|
|
|
Watchdog:
|
1s - 255h
|
|
|
RTC:
|
External Battery
|
|
|
BIOS:
|
Insyde
|
|
|
Power Normal:
|
5V/1.5A(500MHz)
|
|
|
Power Suspend:
|
5V/300mA
|
|
Remark for Order Information: |
|
Cooling Type:
|
Passive
|
|
EEB800-256:
EINDOS-EB800 ETX
Board, LX800,500MHz CPU, 256MB DDR-RAM |
|
Operating Temp.:
|
-20 ¡ãC to +60 ¡ãC
|
|
EEB800-512: EINDOS-EB800 ETX
Board, LX800,500MHz CPU, 512MB DDR-RAM |
|
Extended Temp.:
|
-40 ¡ãC to +85 ¡ãC
|
|
EEB800-1024: EINDOS-EB800 ETX
Board, LX800,500MHz CPU, 1024MB DDR-RAM |
|
Storage Temp.:
|
-60 ¡ãC to +125 ¡ãC
|
|
|
EEB800-256-EXT: Same as:
EEB800-256, But
-40C -+85C Operating Temp. |
|
Shock/Vibration:
|
50G/2.0G
|
|
|
EEB800-512-EXT: Same as:
EEB800-512, But
-40C -+85C Operating Temp |
|
Weight:
|
125g
|
|
|
EEB800-1024-EXT: Same as: EEB800-1024,
But
-40C -+85C Operating Temp |
|
Order Information:
|
EEB800-FFF- XXX
|
|
|
EEB800: Without DDR-RAM,
|
|
Option: EXT
|
Extended Temp.
|
|
|
EEB800-EXT: Without DDR-RAM, But
-40C -+85C Operating Temp.
|
|
¡¡
|
¡¡
|
|
|
¡¡¡¡
|
|
|
|
|
¡¡
|