|
 |
 |
| |
|
|
STACK/104/PC-DK
FEATURES |
|
 |
|
|
|
Two
PC/104 Bus Slot for ISA peripheral Extension
|
|
Placed
side-by-side
|
|
One
PC/104plus Bus Slot for PCI peripheral Ext.
|
|
Two
Standard PCI Slot for PCI peripheral Ext.
|
|
One
Standard ISA Slot for ISA peripheral Ext.
|
|
Standard
PC/AT Connectors:
|
|
Dual
USB
|
|
PS/2
Connectors for Mouse and Keyboard
|
|
DSUB
15 VGA and LCD Connector
|
|
|
 |
|
Four
Serial Port DSUB 9 for Serial 1,2,3 and 4
|
|
The
Stack/104/PC-DK offers possibility to evaluate, debug and test PC/104
CPU module produced by many PC/104 suppliers. The Stack/104/PC-DK based
on dual 16 bit PC/104 module socket placed side-by-side, Two standard
PCI slot, one PC/104plus and one ISA slot. The DK make conversion from
all PC/104 pinout interface to standard PC compatible interface style
connectors, Include: Keyboard/Mouse, four Serial port , LPT, VGA, Molex
Floppy, 44pin 2.00mm Pitch IDE, two USB, LAN, RS485, Battery, Video
Input and so on. The DK also be designed three way power input
structure, Include: ATX Standard Power supply connector, D-Sub Input
(Like HDD, CD-ROM Power Connector), Line by Line input with phoenix
socket. There are four LED indicate the correct input Power status.
onboard offer three Power On/Off switch (one can be used in remote
Switch On/Off),Reset Key, Buzzer and IrDA (Option). There is one DC/DC
converter onboard can provide –30 to 0V voltage generation special fit
for STN/Plasma or any Flat Panel Display which need Negative Voltage. |
|
LAN
RJ-45 for Ethernet Connection
|
| |
|
LPT1
DSUB26 for Parallel Port
|
|
|
34
pin Standard 2.54mm pitch Floppy Interface for PC Floppy Connection
|
|
|
(Convert
Molex MicroFloppy to Standard PC/AT Compatible)
|
|
|
HardDrive
3.5” (40pin) and Harddrive 2.5” (44pin)
|
|
|
Buzzer
(Or Speaker) |
|
|
Three
Video Input connectors
|
|
|
IrDA
(Option)
|
|
Battery
Interface Connector for External Battery
|
|
Especially,
The DK not only can be used with standard CPU board, but also can
be operated with interface stackthrough. By means, some application need
to modify some PC/104 onboard Interface’s connectors to stackthrough
style for Component-like Applications, The modules' self-stacking bus
can be useful for installing multiple modules in one location. when you
used the PC/104 CPU module like this way, some interface’s connectors
have to be changed to stackthrough ,such as: Serial Port, LPT, VGA,
Keyboard/Mouse. After you modified those board connectors, you can find
it is very difficulty to debug or test PC/104 CPU module, Because all
pinout signal of those connectors have already been changed to vertical
downward, you can not use standard cables at all. For those kind of
application, The Stack/104/PC-DK have been designed with interface
stackthrough socket onboard,
Just plug-in your PC/104 CPU module with interface stackthrough
connectors into socket on the DK, then connect your Standard Peripherals
(Such as: Keyboard, VGA, LPT , Serial Port) to the standard Computer
interface on the side (Burden) of the baseboard, you don’t need to
connect any cable, then you can operate your PC/104 systems similar as
standard Desktop Standard Computer.The
DK can be operated in combination Style, That means, You can mixed with
PC/104, PC104+,ISA or PCI board in one system, That is very flexible to
build,test and debug one mixed system (you can use any BUS based CPU
with any BUS I/O or any BUS peripherals together. But please pay
attention: only one CPU boatd can be used with the DK. |
|
RS485 Standard connector
|
|
|
-30C
– 0V Negative ADJ output for STN/ Plasma/ EL. Flat Panel Display
(Rotary Switch for V. ADJ
|
|
Reset
Key onboard
|
|
|
|
|
Onboard LED to indicate:+5V,+12V,-5V,-12V
|
|
|
Multi
Power input Style: ATX standard power supply connector, DSUB connector (5.08mm)
and one by one Phoenix Connectors Input
|
|
|
|
Three
Power On/Off Switch, One of them can be connect to remote switch
(Option)
|
|
|
|
|
Stackthrough sockets for PC/104,PC/104plus,
VGA,Serial port, LPT, Keyboard/Mouse, Utility port and Power.
|
|
|
|
|
|
|
-55C - +85C Storage Temp.
|
|
|
Relative Humidity:5% to 95% non Condensing
|
|
|
Vibration: 5 to 2000Hz
|
|
The
dual PC/104 socket onboard place side by side, that is very easy to pull
out or plug in PC/104 modules during the application development. In the
standard mode, All interface pinout of standard PC compatible connectors
to the PC/104 CPU board have been designed 100% compatible to PC/104
module signal pinout, You just connect interface connectors of CPU
board to the sockets on the baseboard via flat cable one by one. |
|
Red Color PCB (Option: Blue)
|
|
|
Dimension: 312(L)x178(W)x34(H)mm
|
|
|
Baby AT fix hole
|
|
|
|
|
|
|