|
 |
 |
| |
|
|
EINDOS520-SASP
FEATURES |
|
 |
|
|
|
Size:
|
96x90x11mm
|
|
CPU:
|
ELAN SC520
|
|
BUS Internal:
|
PCI/AGP/LPC
|
|
Bus External:
|
PC/104
|
|
Performance:
|
100MHz/133MHz
|
|
MEMORY (MB):
|
2MB Low Power SRAM
|
|
Cache:
|
Built-In CPU(16K)
|
|
Ethernet:
|
10Mbps
|
|
FLASH:
|
2MB
|
|
|
 |
|
RTC and CMOS:
|
Backed with Battery
|
|
The
PC/104 EINDOS520-SASP is a highly integrated industrial embedded CPU
board in PC/104 form factor. It is designed and based on AMD ELAN SC520
CPU single board computer. It can be used in a Extended operating
environment (-45C to +85C) without the necessity of a fan or heat sink.
It include: 100MHz ELAN SC520 Processor, 2Mbyte Flash, 2Mbyte SRAM with
battery backup, RTC and CMOS with battery backup, programmable watchdog,
PC/104 interface, 2 serial ports (configurable as RS232/422/485 with
115200 baud)), 8 digital Inputs, 8 digital outputs, 8 analog outputs, 3
channel Timer/Counter interfaces, 1 user LED, Speaker, 10Mbit Ethernet
and a real time clock. |
|
Timer/Counter:
|
82C54(Three Channels)
|
| |
|
Serial Ports:
|
2 (RS/232/422/485)
|
|
|
|
16C554 Compatible.
|
|
|
Digital I/O:
|
8 Digital Input
|
|
|
|
8 Digital Output
|
|
|
|
TTL-Level and 5V Input |
|
|
Analog Outputs:
|
8 Analog outputs
|
|
|
|
|
Bipolar: +/-5V or +/-10V
|
|
Integration of EINDOS520-SASP into a system
is facilitated by the fact of offering standard 2.54mm connectors for
all interfaces. |
|
Speaker:
|
|
|
|
Power Supply:
|
+5V, +12V, -12V
|
|
The EINDOS520-SASP is
equipped with a " Low Level initialisation Code" (LLIC). The
LLIC resists in the upper 64KB of the onboard flash memory. The LLIC
performs a minimal system initialisation and then prepare for new
application code download or immediately run the pre-loaded application
code. |
|
Power Normal:
|
+5V: 400mA
|
|
|
|
+12V: 50mA
|
|
|
|
-12V: 50mA
|
|
|
Real time clock:
|
|
|
The
LLIC contains a download utility (DU) for an easy user application code
download into onboard flash. The DU is activated by the user if at power
up the DA-Jumper (J10) is set or pin 6 of the serial connector(J8) is
connected to ground. Then the LLIC automatically downloads the user
application code over serial port COM1 and write the application code
image to a predefined address in the onboard flash. After a successful
application download into the onboard flash, The LLIC stops the system,
Then the system can be shut down (turn power off ), Now on the next
power up, the system starts the new downloaded application. A lot of
software and operating system can be used with EINDOS520-SASP, for
example: Paradigm software. |
|
User LED:
|
1
|
|
|
Weight:
|
90g
|
|
|
Cooling Type:
|
Natural without heat sink
|
|
|
Operating Temp.:
|
-45 ＜C to +85C ＜
|
| |
|
Relative Humidity:
|
5%-95% no condensing
|
|
|
|
|
|
|
Software Low Level:
|
Initialisation code
|
| |
|
Mode support:
|
Real and Protected
|
|
|